One thing to take note of, in the photo of the snake breaching the stovepipe guard Lane posted, is it's using the screw heads on the baffle to climb up.
That's probably a big reason why one-piece, smooth cylinders like PVC are more effective at thwarting snake attacks.
That said, it's still best practice to use a stovepipe/PVC style guard, in addition to netting placed above it.
Of course, your hard pressed to beat electric guards - those are definitely "tier 1" when it comes to guarding poles.
Snakes in Gourds question
-
M.Stephens
- Posts: 1130
- Joined: Tue Apr 07, 2009 3:14 pm
- Location: Texas/Texarkana
Matt I have all that you mentioned above....I went "tier 1" electric plus the stovepipe and pvc with netting above.
Malcolm
2015 (110 nesting pair)
2014 (92 nesting pair)
2013 (75 nesting pair)
2012 (35 nesting pair)
2011 (20 pair)
____________
PMCA Member
2015 (110 nesting pair)
2014 (92 nesting pair)
2013 (75 nesting pair)
2012 (35 nesting pair)
2011 (20 pair)
____________
PMCA Member
-
jmeyer
- Posts: 68
- Joined: Fri Apr 15, 2011 2:29 pm
- Location: Columbia, MO
- Martin Colony History: First martins in 2008. Currently have housing for 36 pairs. Usually get about 28.
I think the baffle in the picture is fixed when it should really sway. If the baffle can rock when the snake tries to climb it, it will be harder for them to get a hold and slither up. Still not fool proof but makes a big difference.
-
DornCounty
- Posts: 2169
- Joined: Tue Feb 14, 2012 3:58 pm
- Location: Rural SE Kansas
- Martin Colony History: .
.
Trio-Jedi
to me it looks like that guard was too low.BuddyS wrote:OK so I'm guessing that there is no sure fire way, other than electrifying, that will stop a snake. I couldn't believe the photo of the rat snake climbing right up and over the stove pipe guard. Is a bigger diameter/circumference the key when setting up a predator guard? Maybe a small barrel or beer keg?
2017 - Home & Public Colonies - 300 Cavities
-
DornCounty
- Posts: 2169
- Joined: Tue Feb 14, 2012 3:58 pm
- Location: Rural SE Kansas
- Martin Colony History: .
.
Trio-Jedi
It's also too low. .the snake is using the ground to push up against. That said no way is fool proof and if I put snake netting up on the public colonies I would hanging from snake netting by the time it was over.Matt F. wrote:One thing to take note of, in the photo of the snake breaching the stovepipe guard Lane posted, is it's using the screw heads on the baffle to climb up.
That's probably a big reason why one-piece, smooth cylinders like PVC are more effective at thwarting snake attacks.
That said, it's still best practice to use a stovepipe/PVC style guard, in addition to netting placed above it.
Of course, your hard pressed to beat electric guards - those are definitely "tier 1" when it comes to guarding poles.
2017 - Home & Public Colonies - 300 Cavities
I concur that it's too low.DornCounty wrote:It's also too low. .the snake is using the ground to push up against. That said no way is fool proof and if I put snake netting up on the public colonies I would hanging from snake netting by the time it was over.
However, being too low is much more of a factor, when stopping "furry" predators (raccoons, cats, etc.) that have to use the ground as a launching point to get past the guard.
However with climbing snakes like rat snakes, the snakes can use the pole itself as a launching point, to extend out, and get a hold of the guard.
Even if that same guard in the photo was 10 feet off the ground, that snake would've still got past it.
-
DornCounty
- Posts: 2169
- Joined: Tue Feb 14, 2012 3:58 pm
- Location: Rural SE Kansas
- Martin Colony History: .
.
Trio-Jedi
I'll agree to disagree.Matt F. wrote:I concur that it's too low.DornCounty wrote:It's also too low. .the snake is using the ground to push up against. That said no way is fool proof and if I put snake netting up on the public colonies I would hanging from snake netting by the time it was over.
However, being too low is much more of a factor, when stopping "furry" predators (raccoons, cats, etc.) that have to use the ground as a launching point to get past the guard.
However with climbing snakes like rat snakes, the snakes can use the pole itself as a launching point, to extend out, and get a hold of the guard.
Even if that same guard in the photo was 10 feet off the ground, that snake would've still got past it.
2017 - Home & Public Colonies - 300 Cavities
-
Thurman Seber~TN
- Posts: 416
- Joined: Tue Nov 11, 2003 2:02 pm
- Location: Alexandria , Tennessee
I am of the opinion that a section of six inch pvc pipe at least five feet long at the bottom of the pole will also work. I had the pvc for years but I always had it backed up with electric guards. However Emil tells me it works for him and I sure believe him
Thurman Seber, Alexandria, Tennessee
-
Jose Rodriguez
- Posts: 692
- Joined: Tue Mar 11, 2014 10:34 am
- Location: FL/Belleview

